rotary compressor

美 　英

• un.旋轉式壓氣機；回轉式壓縮機；旋轉式壓縮機；旋轉式壓縮器
• 網絡旋轉壓縮機；轉子式壓縮機；回轉壓縮機

英漢解釋

un.	1. 旋轉式壓氣機 2. 回轉式壓縮機 3. 旋轉式壓縮機 4. 旋轉式壓縮器 5. 旋轉式壓風機

例句

Rotary compressor is most suitable for close to full load operation conditions of the compressor compressed air system.

旋轉式壓縮機最適用于接近壓縮機滿負荷工況下運行的壓縮空氣系統。

A rotary compressor with pre-compression cannot be operated with hydraulic fluid. d.

具有預壓縮裝置的旋轉壓縮機不可能輸送油流。

The traditional rotary compressor for more than single-cylinder type, and later a two-cylinder compressor.

傳統的旋轉式壓縮機多為單缸型，后來出現兩缸的壓縮機。

Rotary compressor basically use in the fridge and in air conditioning, commercial refrigeration equipment.

旋轉式壓縮機主要用在冰箱和空調中、商業制冷裝置中也有。

This paper analyze characteristic of heat exchange on rolling piston type rotary compressor.

就滾動轉子式壓縮機的傳熱特性進行了分析。

Rotary compressor is applied widely in residential air conditioner.

滾動轉子式壓縮機在家用空調器中得到了廣泛應用。

As we all know, screw compressor (including the twin-screw and single screw two) in the rotary compressor in the largest share.

眾所周知，螺桿壓縮機（包括雙螺桿和單螺桿兩種）在回轉壓縮機中所占比重最大。

Rotary compressor for successive work, air compressor frequent downtime and boot will make bearing damaged.

旋轉式空壓機為連續式工作，空壓機頻繁的停機和開機將使軸承受損。

Rotary compressor rotor is rolling on China's short for compressor.

旋轉式壓縮機是我國對滾動轉子壓縮機的簡稱。

and speed rotary compressor bearings , gear and other growth.

回轉式和速度式壓縮機的軸承、增速齒輪等。

rotary compressor of air-space, the rotor (rotating body), such as exhaust valve .

回轉式壓縮機的氣腔、轉子（旋轉體）、排氣閥等。

Sliding Vane Kinetic Characteristics Analysis for a Synchronal Rotary Compressor

同步回轉式壓縮機滑板運動分析

Study of Pressure Pulsation in Discharge Muffler of Rotary Compressor

旋轉式壓縮機消音器內壓力脈動研究

Performance Comparing on Rolling Piston Type Rotary Compressor And Reciprocal Type Compressor in Low Temperature

低溫全封閉滾動轉子式和半封閉活塞式制冷壓縮機組的性能比較

Noise control of the accumulator of a rotary compressor

旋轉式壓縮機儲液器的噪聲控制

Design of a Variable Capacity Rotary Compressor Using By-pass Method

采用旁通法的變容量轉子式壓縮機的設計

Essential Geometric Theory of Internal-meshing Rotary Compressor

內嚙合轉子壓縮機基本幾何理論研究

Geometric Theory for a Synchronal Rotary Compressor

同步回轉式壓縮機的幾何理論

FEM Analysis on Rotor Deformation of a Mono-Tooth Rotary Compressor

單齒轉子壓縮機轉子變形的有限元分析

Improvement Study of Muffler of Rotary Compressor

滾動轉子壓縮機消聲器性能改進研究

Acoustic Characteristic Analysis and Improvement of Muffler of Rotary Compressor

壓縮機消聲器的聲學特性測試分析及其改進研究

Analysis of operational characteristics of tilted vane in rotary compressor with rolling piston

傾斜滑片滾動活塞壓縮機工作特性分析

Analysis of Acoustic Characteristics of the Muffler on Rotary Compressor

旋轉式壓縮機消聲器的聲學特性分析

Geometric Relationship of New Type of Internal Meshing Rotary Compressor

一種新型內嚙合轉子壓縮機幾何關系

Effects of Radial Clearance on Performance of Inverter-driven Rolling Piston Rotary Compressor

轉子徑向間隙對滾動轉子式變頻壓縮機性能的影響

Experimental Analysis and Improvement Research of Muffler of Rotary Compressor

空調轉子壓縮機消聲器實驗分析及改進研究

The analysis of the technical characteristics of rotary compressor

滾動轉子式壓縮機的技術特性分析

Simulation of Volumetric Efficiency for Rolling Piston Type Rotary Compressor

滾動轉子式壓縮機容積效率計算模型

The Processing Technology of Crankshaft Wear-resistant Coat for Rotary Compressor

旋轉式壓縮機曲軸耐磨耗涂層處理技術

Modification of Profile for Internal-Meshing Cycloid Rotary Compressor

內嚙合擺線轉子壓縮機齒型修正研究

Mechanical Analysis of a New Rotary Compressor

一種新型全平衡高強度轉子式壓縮機的受力分析

Simulation and Investigation on Rolling Piston Type Rotary Compressor

滾動轉子式壓縮機模擬與實驗研究

A new engineering design method of the suction structure and discharge in the rotary compressor

旋轉壓縮機吸排氣結構的工程設計新方法

Geometry Relations of a New Rotary Compressor

一種新型全平衡高強度轉子式壓縮機的幾何關系

Improvement of the Pairs of Friction and Airproof of Vane Type Rotary Compressor

滑片式壓縮機摩擦與密封結構的改進設計

Theoretical Analysis of Meshing Force on Teeth in a New Type of Rotary Compressor

一種新型轉子壓縮機的內外轉子嚙合力分析

Improving Dependability of Rotary Compressor

提高旋轉式壓縮機可靠性的技術

Position of Support Force on Cylinder in Internal-Meshing Cycloid Rotary Compressor

內嚙合擺線轉子壓縮機缸體支撐力位置理論研究

Investigation on the Hinged-Vane Type Rotary Compressor with Low Vibration and Low Friction

低振動低摩擦鉸接葉片式旋轉壓縮機的研究

Experimental Study on Effect of Clearance Volume on Performance of Rotary Compressor

余隙容積對滾動轉子式壓縮機性能影響的試驗研究